|
STANDARD
EQUIPMENT:
Motor: 36 volt DC high efficiency series
wound, brazed armature, solid copper windings.
Drive Train: Direct motor shaft connected to
transaxle pinion shaft.
Electrical System: 36 volt DC, six, 6
volt deep cycle storage batteries (107 minute,
220 amp-hour @ 20 Hr. discharge rate). Dash
mounted electronic "state of charge" meter.
Speed Control: Solid state continuously
variable speed controller. 300 Amp capacity,
Non-contact inductive throttle sensor.
Charger: Powerwise™ portable fully
automatic line compensating, 21 amp DC output at
36 volts; input 120 volts, 9.5 amps, 60 cycle
AC, Underwriters Laboratories (U.L.) Listed,
C.S.A. Certified, anti drive away
charger/vehicle interlock.
Transaxle: High efficiency helical gears,
12.44:1 ratio.
Brakes: Dual rear wheel mechanical drum
brakes, self-adjusting with non-asbestos
linings. Automatic park brake release with
self-compensating system.
Front Suspension: Leaf springs with
hydraulic shock absorbers.
Rear Suspension: Leaf springs with
hydraulic shock absorbers.
Steering: Self-compensating single
reduction rack and pinion.
Speed: 12 - 14 MPH (19 - 23 KPH)
Lighting: Headlights, taillights, brake
lights and horn.
Wheels: 10" Aluminum mag wheels with Kenda
tires
Dash: Wood grain dash w/locking glove box
door (LH/RH)
Top: Top and Fold Down Windshield
DIMENSIONAL
SPECIFICATIONS:
Weight: 560 lbs. (254 KG), without batteries
Length: 92.6 inches (2.35m) Width:
46.5 inches (1.18m) Height: 48.6 inches
(1.23m) at steering wheel
Wheel Base: 65.5 inches (1.66m)
Front Wheel Tread: 33.5 inches (0.85m)
Rear Wheel Tread: 38.0 inches (0.97m)
Clearance Circle: 18.9 feet (5.72m)
Tires: 18 x 8.50 x 8 (4 ply rated)
Load Capacity: 800 lbs. (362 KG)
including operator, passengers, accessories and
cargo.
Seating: Vacuum formed fabric backed
vinyl covers over thick cushion foam. Standard
seating for operator and one passenger.
FEATURES: 1.
Body & Finish: Durashield™ body of
automotive quality injection molded TPE
(thermoplastic elastomer). Molded-in color with
automotive color coat/clear coat finish.
2. Chassis: Welded high yield strength
tubular steel with Durashield™ powder coat
paint.
3. Safety: Dash mounted key switch, reverse
warning indicator, "deadman" accelerator
control, integral handgrip on hip restraints,
manual forward/reverse selector with "neutral".
4. Dash Panel: Tee, ball, and 4 position
drink holders of scuff resistant glass fiber
reinforced thermoplastic olefin.
5. Steering Wheel: Hi-tech design with dual
handgrips, pencil holder, integral scorecard
holder. |
